APC SMT1000I – Smart-UPS – 1000VA LCD – 230V

Description

Features

• High online efficiency  Reduces utlility costs, generates less heat.
• Green mode  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Energy meter  Provides actual kilowatt hours of usage for energy conscious users.
• Predictive replace battery date  Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
• Intuitive LCD interface  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
• Single switched outlet group  Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
• Pure sine wave output on battery  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Cold-start capable  Provides temporary battery power when the utility power is out.
• SmartSlot  Customize UPS capabilities with management cards.
• Temperature-compensated battery charging  Prolongs battery life by regulating the charge voltage according to battery temperature.

Smart-UPS Features & Benefits

Availability

• Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
• Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
• Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Disconnected battery notification Warns when a battery is not available to provide backup power.

Manageability

• Network manageable Provides remote power management of the UPS over the network.
• Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
• LED status indicators Quickly understand unit and power status with visual indicators.
• Serial connectivity Provides management of the UPS via a serial port.
• USB connectivity Provides management of the UPS via a USB port (not available on all models).
• Disconnected battery notification Warns when a battery is not available to provide backup power.

Serviceability

• User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
• Resettable circuit breakers Enables a quick recovery from overload events.
• Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability

• Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
• Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Safety
Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Technical Specifications

Output

• Output Power Capacity 700 Watts    / 1000 VA
• Max Configurable Power 700 Watts    / 1000 VA
• Nominal Output Voltage 230V
• Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion Less than 5% at full load
• Output Frequency (sync to mains) 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
• Other Output Voltages 220, 240
• Topology Line Interactive
• Waveform Type Sine wave
• Output Connections
• (8) IEC 320 C13    IEC 320 C13
• (2) IEC Jumpers

Input

• Nominal Input Voltage 230V
• Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
• Input Connections
• IEC-320 C14
• Input voltage range for main operations 160 – 286V
• Input voltage adjustable range for mains operation 151 – 302V
• Other Input Voltages 220, 240

Communications & Management

• Interface Port(s) SmartSlot, USB
• Available SmartSlot™ Interface Quantity 1
• Control panel Multi-function LCD status and control console
• Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
• Emergency Power Off (EPO) Optional

Surge Protection and Filtering

• Surge energy rating 459 Joules
• Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

• Maximum Height 219.00 mm
• Maximum Width 171.00 mm
• Maximum Depth 439.00 mm
• Net Weight 18.86 KG
• Shipping Weight 22.77 KG
• Shipping Height 376.00 mm
• Shipping Width 328.00 mm
• Shipping Depth 595.00 mm
• Color Black
• Units per Pallet 12.00

Environmental

• Operating Environment 0 – 40 °C
• Operating Relative Humidity 0 – 95%
• Operating Elevation 0-3000 meters
• Storage Temperature -15 – 45 °C
• Storage Relative Humidity 0 – 95%
• Storage Elevation 0-15000 meters
• Audible noise at 1 meter from surface of unit 41.00 dBA
• Online Thermal Dissipation 100.00 BTU/hr